GE DRAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
Chapter 8 - Replacement Procedures 8-167
17.)Insert the printer USB cable in to the nest box.
18.)Route the color printer USB and power cable through the left side cable clamp.
Figure 8-237 Routing the cables
19.)Screw the 7 screws and fix the REAR EMI COVER.
20.)Assemble the REAR CABINET BEZEL ASSY BT16, power cord and POWER CORD FIX
BRACKET.
Figure 8-238 Assembling the rear side parts
Printer USB cable in Nest box
Left side cable clamp
Screw the 7 screws
Assemble REAR CABINET BEZEL ASSY BT16,
power cord and POWER CORD FIX BRACKET
To Next Page
Loading...
