GE HEALTHCARERAFT VOLUSON® P8 / VOLUSON® P6
DIRECTION 5459672-100, R
EVISION 6 DRAFT (JANUARY 17, 2013) PROPRIETARY SERVICE MANUAL
3-68 Section 3-11 - Connectivity Setup
3-11-2 Wireless Network Configuration (cont’d)
5.) Select the country where you will use the wireless USB adapter from the “pull-down menu” and then
click AGREE
.
The Setup Wizard window appears:
6.) Enter “Network Name (SSID)” and check/adjust all other settings.
NOTE: For detailed description of available parameters, refer to Section 3-11-2-1 "Description of “Netgear”
Configuration Parameters" on page 3-69.
7.) Type a suitable name for the new profile into the “Profiles” box and then click SAVE PROFILE
.
8.) Finally click FIND NETWORK
and wait a few seconds....
Figure 3-63 select the country
Figure 3-64 Setup wizard - Settings
[Country]
Pull-down Menu
NOTE:
This example shows
fictional information!
[Save Profile] button
[Find a Network]
button
Profile
SSID
Type
Wireless Security
To Next Page
Loading...
