GE WCVH4800KWW - Page 81

Outer Tub Assembly Removal
Disconnect
Disconnect
WARNING:
The outer tub assembly is heavy and requires two people to
WARNING:
The
outer
tub
assembly
is
heavy
and
requires
two
people
to
remove it from the washer cabinet. Care should be taken when removing
and installing the outer tub assembly.
•
After removing the top cover, control panel, front panel and back cover,
After
removing
the
top
cover,
control
panel,
front
panel
and
back
cover,
drain the washer using the pump drain hose.
• Disconnect the blue and red wires from the heater. Remove both wires
from the wire
g
uide.
Copyright 2009
81
g
• Remove the Phillips-head screw that attaches the motor wire harness
clamp to the heater shield.