Troubleshootingtips.
Save time and money!
ge. corn
Possible Causes
Refdgerator does not Control in 0 (o#) position.
Refrigeratorunplugged.ks
The fuse is blown/circuit
breaker is tripped.
Vibration or rattling Front leveling legs
(slight vibration need adjusting.
is normaO
Refrigerator is on
an uneven surface.
Motor operates for Normal when refrigerator
long periods or cycles ksfirst plugged in.
What ToOo
Move the control to a
temperature setting.
Push the plug c()mpletely
into the outlet.
Replace fllse or reset
the breaker.
See Leveling Legs.
Use shims/o level tile
rcfligemtor.
W;fit 24 hours %r the
refrigerator to completely
COO1 dowu.
Often occurs when This is normal.
large amounts of food
are placed in refrigerator.
Door left open. Check to see if package is
holding door open.
Hot weather or frequent
door openings.
Temperature control
set at the coldest setting.
Not enough dearmme
from the wall.
This is normal.
See About the control
See Clearancesin Preparing
to install the refrigerator.
/3
To Next Page
Loading...
