ZP3 Fire Control Panel User Guide
Zone screen
The following paragraphs describe how to read the LCD display when it indicates an alarm. The
Zone Screen shown in Figure 11 indicates automatically when an alarm is received.
Figure 11: Typical zone screen
Top row: alarm information
• The left side of the row indicates the type of alarm that exists, for example "FIRE”, "FAULT",
"DISABLED", or "OTHER".
• The word Zones indicates that you are viewing the zone screen.
• The right side of the row shows the total number of current zone alarms (events), for example
“02”
Second row: details of first alarm
• The event number is shown on the left side of this row.
• The remainder of the row gives the description of the zone.
• The time of the alarm, for example 06:37 is shown at the end of the row (optional).
Note: The second row by default displays the first alarm received, when it indicates "event 1". When manually
scrolling, the alarm shown on row 2 changes to the next or previous event.
Third row: details of other alarms
• The event number is shown on the left side of this row.
• The remainder of the row gives the description of the zone, for example the location.
• The time of the alarm, for example 06:44 is shown at the end of the row (optional).
Note: The third row displays the last alarm received.
Bottom row: confirms type of alarm shown
The type of alarm, for example “FIRE”, is shown in line with the associated alarm view button and
common alarm indicator.
Revision 11 (05/01/2010) Page 15
To Next Page
Loading...
