GEA OTC 3-02-137 User Manual

Westfalia Separator
Mineraloil Systems GmbH 71
2051-9001-010 / 1205
4.3.3 Lubrication
The spindle bearings are splash-lubricated from a central oil bath.
MOTOR BEARINGS
For re-greasing the motor bearings, refer to the instructions of the motor manu-
facturer.
OIL QUALITY (mineral oil)
The mineral gear oil tested by Westfalia Separator with the designation "Separa-
tor lube oil CLP 100" meets the requirements and should preferably be used.
Designation
according to DIN 51502
CLP
100
Designation
as per ISO 3498
CC 100
Viscosity class
SAE 30
Viscosity
(at 40
o
C/104
o
F)
100 ± 10 mm
2
/s (cSt)
Part-No.
0015-0003-080 (2.5 litres)
Dispose of the oil as per instructions of the oil manufacturer.
The viscosity class SAE 30 covers a larger viscosity range than specified here.
However, only oils with the viscosity range specified here may be used.
Do not use mineral motor vehicle or engine oils.
OIL QUALITY (synthetic oil)
Use the synthetic lube oil tested by Westfalia Separator!
Designation
according to ISO
Mobil SHC 626
Viscosity class (ISO)
VG 68
Viscosity
- at 40
o
C (104
o
F) 65 mm
2
/s
- at 100
o
C
(
212
o
F
)
10.4 mm
2
/s
Viscosity index (VI)
147
Density (at 15
o
C/59
o
F)
0.857 g/ml
based on
Polyalphaolefin
Part-No.
0015-0020-010 (1 litre)
Dispose of the oil as per instructions of the oil manufacturer.
Do not use mineral motor vehicle or engine oils.

GEA OTC 3-02-137 Specifications

General

Brand	GEA
Model	OTC 3-02-137
Category	Water Filtration Systems
Language	English