Need help?Do you have a question about the GeBe POWERMAN 2000i and is the answer not in the manual?
Congratulates the user and recommends reading the manual for proper operation.
Covers critical safety levels (DANGER, WARNING, CAUTION, NOTICE) and operational safety advice.
Highlights the importance and location of warning labels on the generator.
Emphasizes grounding and safe practices for connecting to power supplies.
Covers safe refueling, operation area, and warnings about hot generator parts.
Reinforces safety advice on ventilation, refueling, electrical hazards, and PPE.
Identifies and describes the function of each control panel indicator and switch.
Details the three positions (OFF, CHOKE, ON) of the combined switch and fuel valve.
Explains what triggers the red overload light and the steps to resolve it.
Describes the function of the oil warning light and its effect on engine operation.
Indicates when the engine starts and produces AC power.
Explains the function and reset procedure of the 12V DC protector.
Details how to operate the fuel tank cap and its air vent knob for fuel flow control.
Describes the purpose of the ground terminal for electrical shock prevention.
Explains the ESC function for controlling engine speed based on load for fuel efficiency.
Identifies the terminal for connecting special cables for parallel generator operation.
Highlights the importance of performing checks each time before operating the generator.
Provides guidance on fuel type, capacity, and safe refueling practices.
Details the process and precautions for adding engine oil.
Specifies the recommended engine oil grade and quantity for the generator.
Lists essential checks for fuel and engine oil before operating the generator.
Explains how atmospheric conditions affect generator output.
Step-by-step guide on how to safely start the generator engine.
Provides instructions on how to properly shut down the generator.
Advises on safe practices before connecting electrical devices to the AC outlets.
Details the steps for charging a 12V battery using the generator.
Highlights safety measures and warnings related to battery charging.
Provides first aid instructions for contact with battery acid.
Advises to keep the total load within the generator's rated output to prevent damage.
Lists AC output power ratings and corresponding power factors for different loads.
Details the rated voltage and current for the DC output.
Presents a table of generator rated output for AC and DC power.
Explains when the overload indicator light comes on and its implications.
Emphasizes the importance of periodic inspection, adjustment, and lubrication.
Advises seeking professional help for maintenance if unfamiliar, and stopping the engine.
Provides a schedule for routine checks of spark plug, fuel, oil, and filters.
Details checks for air filter condition and muffler screen cleaning.
Outlines checks for spark arrester condition and fuel filter cleaning/replacement.
Specifies checks for crankcase breather hose and decarbonization of the cylinder head.
Details checks for valve clearance adjustment and tightening of fittings/fasteners.
Guides on inspecting the spark plug, including type, gap, and cleaning.
Provides a step-by-step process for draining and refilling engine oil.
Details the procedure for cleaning and oiling the air filter element.
Outlines how to clean and reinstall the fuel tank filter.
Guides on cleaning the muffler screen and spark arrester, including safety warnings.
Details the steps for removing, cleaning, and reinstalling the fuel filter.
Provides steps for draining fuel and protecting the engine for storage.
Details steps to protect the cylinder, piston ring, etc., from corrosion during storage.
Lists common engine start problems and their solutions.
Addresses issues where the generator is not producing power.
Lists detailed technical specifications for the generator, including power, voltage, and dimensions.
Provides technical details about the generator's engine, such as model, type, and displacement.
Diagram illustrating the electrical connections without parallel receptacle.
Diagram showing electrical connections when parallel receptacle is used.
Instructions on how to connect two generators for parallel operation to increase output.
Highlights warnings related to overloading and using correct cables for parallel operation.
Details the output power ratings for single and parallel generator operation.
States that the product complies with relevant EU directives and standards.
To Next Page
General