Page 15 Revision I FROM 2012-09-20
PPUH ‘GECO’ reserves the right to refuse a free repair of the unit, if
there is no form, the form is not filled in completely or the seals are
broken !!!
P.P.U.H. ‘Geco’ Sp. z o. o. is not responsible for loses and damages resulting
from provision of information on the method of making changes in the system
data of G-201 by the producer or its service to the final client, incorrect or non-
professional assembly and for loses caused by defective operation of the
appliance.
XII. SOFTWARE RELEASE CHANGES
XIII. 12 Dec. 2002 – Release 02. Changed operation of the
key. For details – see chapter VI
GENERAL OPERATION PRINCIPLES
.
8.Feb. 2005 – Release 03. Added parameters c4, d5,d6, extended parameter ‘r6’. Option for
connection of the third temperature sensor.
To Next Page
Loading...
