GH20SB – User Manual PAGE 17
3.3.5.3. Sound Settings Editing
To edit sound settings choose “Controller settings” on the main menu screen and then
“Sound settings” on the Controller configuration menu screen.
On this screen you can edit:
Alarm sounds (Yes / No),
Keys (Yes / No).
Press and to switch between these settings and press to edit the currently
highlighted setting.
During active edition the setting value flashes. Use and to set a new value. Press
to save the new value and exit the setting edition option. Press to cancel the change and
exit the setting edition option.
Press (when setting edition is not active) to return to the Controller configuration menu
screen.
Press to cause the Controller to switch to the standby mode.
3.3.5.4. Language Selection
To go to the language selection screen choose “Controller settings” on the main menu screen
and then “Language” on the Controller configuration menu screen.
To Next Page
Loading...
