GH20SB – User Manual PAGE 29
6.5. Scheme 5 – the basic scheme with a circulation pump and a heat pump.
Output Device connected
O1 Collector pump P
O2 Heat pump K
O3 Circulation pump C
Sensor Description
T1 Collector sensor (Required)
T2 Tank sensor (Required)
T3 Sensor for calculating power/energy (Optional)
T4 Tank sensor (Required)
6.6. Scheme 6 – the basic scheme with a circulation pump, activating domestic hot water
heating after the boiler achieves the required temperature.
Output Device connected
O1 Collector pump P
O2 Boiler pump K
O3 Circulation pump C
Sensor Description
T1 Collector sensor (Required)
T2 Tank sensor (Required)
T3 Sensor for calculating power/energy (Optional)
T4 Tank sensor (Required)
To Next Page
Loading...
