Geeetech Rostock 301 Building Instruction

www.geeetech.com
Page 48
ShenZhen GETECH CO.,LTD
*Note: Do not screw it too tightly as it may restrict the free movement of the drive
wheel. It is important that you leave enough room for the wheel to turn
freely.
Repeat these steps to assemble the other two drive wheel assemblies.
Step 4. Fix the drive wheel assembly loosely on the top plate (#A1) with a wing
nut (#12).
Repeat these steps to mount the other two drive wheel assemblies to the top plate
(#A1).
7.2 Add the belt
Name
Part #
Qty.
Picture
Timing Belt
#38
3
M3 x8 Screw
#19
6

Geeetech Rostock 301 Specifications

General

Brand	Geeetech
Model	Rostock 301
Category	3D Printers
Language	English