https://geekworm.com Support: support@geekworm.com
We can manually run the following commands:
python /home/pi/x735-v2.5/pwm_fan_control.py
Then the x735 fan will start working.
But we hope that the script can be executed automatically when the Raspberry Pi board boots, we can use
crontab system command to achieve it. please refer to the following.
6. How to start PWM fan when pi 4 boots
sudo crontab -e
Choose "1" then press Enter
Add a line at the end of the file that reads like this:
@reboot python3 /home/pi/x735-v2.5/pwm_fan_control.py
Please note the path of this file.
To Next Page
Loading...
