8
Replace the base plate by placing the hook found on the bottom
left of the LoopHEAR
TM
into the catch on the base plate. Press
the LoopHEAR
TM
down gently until you hear a click.
Plug the power cable into the power socket found on the rear of
the unit. Plug the adaptor into the mains supply and switch the
supply on.
Please use the strain relief mechanism as displayed. This
provides extra protection for the cable at the connection point. It
will extend the life of the power cable and reinforce the
connection to the equipment.
Hook
Catch
Strain Relief
INSTALLATION
To Next Page
Loading...