EasyManua.ls Logo

Gehl 383Z - ENGINE

Gehl 383Z
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Printed in U.S.A. 5-1 918196/EP0913
CHAPTER 5 – TROUBLESHOOTING
ENGINE
Problem Possible Cause Corrective Action
Engine hard -starting or fails
to start
No fuel Add fuel to tank; bleed air from fuel system
Incorrect engine oil SAE grade Replace engine oil with proper grade; see
"Fluid Capacities/Lubricants” on page 1-4
Incorrect fuel grade Replace fuel with proper grade; see "Fluid
Capacities/Lubricants” on page 1-4
Loose, or corroded starter circuit connections Repair starter circuit; contact authorized ser-
vice center
Incorrect engine clearance Adjust clearance; contact authorized service
center
Battery power insufficient Charge battery or replace if necessary. See
"Battery” on page 4-16
Fuel filter contaminated Replace fuel filter; see "Fuel Filter” on page 4-
14
Malfunctioning fuel injector(s) Repair fuel injector(s); contact authorized ser-
vice center
Starter not working / pinion fails to engage Repair starter/pinion; contact authorized ser-
vice center
Glow plug system not working Repair glow plug system; contact authorized
service center
Rough running engine Incorrect fuel grade Replace fuel with proper grade; see "Fluid
Capacities/Lubricants” on page 1-4
Incorrect engine clearance Adjust clearance; contact authorized service
center
Fuel line leakage Replace fuel line; contact authorized service
center
Malfunctioning fuel injector(s) Repair fuel injector(s); contact authorized ser-
vice center.
Insufficient engine power Fuel line leakage Replace fuel line; contact authorized service
center
Air filter contaminated Service air filter; see "Air Cleaner” on page 4-
12
Engine not at operating temperature Warm up the engine
Incorrect fuel grade Replace fuel with proper grade; see "Fluid
Capacities/Lubricants” on page 1-4
Incorrect engine clearance Adjust clearance; contact authorized service
center
Oil level too high Adjust oil level; see "Changing Engine Oil and
Filter” on page 4-11
Malfunctioning fuel injector(s) Repair fuel injector(s); contact authorized ser-
vice center
Engine overheated. Check cooling system

Table of Contents

Related product manuals