Gehl 383Z - Load Diagrams

918196/EP0913 1-10 Printed in U.S.A.
Load Diagrams
Figure 1-4 Standard Long Dipper Arm
Load Diagram
Maximum permissible loads (standard long dipper arm)
All table values are in lbs. (kg) and for a machine in a horizontal position on
firm ground without bucket.
If equipped with a bucket or other implements, lift capacity or tilt load is
reduced by bucket or implement weight.
Calculation basis: According to ISO 10567.
The excavator's lift capacity is restricted by the settings of the pressure relief
s and the hydraulic system's stabilizing features.
Neither 75% of the static tilt load nor 87% of the hydraulic lift capacity is
exceeded.
16'3"
(5.0 m)
13'0"
(4.0 m)
13'0"
(4.0 m)
9'9"
(3.0 m)
6'6"
(2.0 m)
3'3"
(1.0 m)
0'0"
(0 m)
-3'3"
(-1.0 m)
-6'6"
(-2.0 m)
9'9"
(3.0 m)
9'9"
(3.0 m)
6'6"
(2.0 m)
3'3"
(1.0 m)
0'0"
(0 m)
16'3"
(5.0 m)
13'0"
(4.0 m)
9'9"
(3.0 m)
6'6"
(2.0 m)
3'3"
(1.0 m)
0'0"
(0 m)
14’9”
(4.5 m)
11’6”
(3.5 m)
8’2”
(2.5 m)
9’9”
(3.0 m)
6’6”
(2.0 m)
1554*
(705*)
937
(425)
1477*
(670*)
1422
(645)
3’3”
(1.0 m)
1664*
(755*)
794
(360)
1742*
(790)
904
(410)
2127*
(965*)
1323
(600)
3351*
(1520*)
2172
(985)
0’0”
(0.0 m)
1653*
(750*)
772
(350)
1863*
(845*)
871
(395)
2579*
(1170*)
1246
(565)
4354*
(1975*)
2006
(910)
-3’3”
(-1.0 m)
2590*
(1175*)
1213
(550)
4233*
(1920*)
1973
(895)
-6’6”
(-2.0 m)
3461*
(1570*)
2017
(915)
Maximum permissible load on extended dipper arm
A Overhang from the center of the turntable
B Height of load fixing point
* Lifting capacity hydraulically limited
Dozer blade support in drive direction
Dozer blade support 90° to drive direction
MAX
B
A