Gehl 503Z - ISO-Style Safety Decal Locations (Serial Numbers AJ02993 and Up)

918070/FP0811 2-11 Printed in U.S.A.
ISO-Style Safety Decal Locations (Serial Numbers AJ02993 and Up)
1
7
8
13
9
11
1
4
2
10
14
12
3
3
6
12
5
3
WARNING! Stay Clear Decal
AVOID INJURY OR DEATH!
Located next to the track tension grease fitting on
both sides of the machine.
WARNING! Grease is under high pressure. Keep
your face and body away from the fitting.
Do not loosen the fitting more than two turns. Do
not loosen parts other than the fitting.
Refer to the operator’s manual for track adjustment
procedure.
1
WARNING! Danger Zone Decal
AVOID INJURY OR DEATH!
Located on both sides of the boom.
Keep bystanders away from the machine when it
is in use.
2
WARNING! Hydraulic Reservoir Under Pressure
AVOID INJURY OR DEATH!
Located on the hydraulic system accumulator bulb
inside the engine compartment.
Relieve hydraulic pressure before servicing
machine. Removed hydraulic reservoir cap slowly.
Refer to the maintenance section in the operator’s
manual before servicing the machine.
4
WARNING! Hot Surfaces Decal
AVOID SERIOUS INJURY!
Located inside the engine
compartment.
Stop the engine and wait for all
parts to cool before opening the
engine compartment. Hot
surfaces can cause severe burns.
Read the operator’s manual
before performing any
maintenance on the machine.