Gehl 503Z - ISO-Style Information Decal Locations (Serial Numbers AJ02993 and Up)

Printed in U.S.A. 2-14 918070/FP0811
ISO-Style Information Decal Locations (Serial Numbers AJ02993 and Up)
16
20
21
16
18
19
16
19
15
15
19
19
17
16
22
15
Track Front Decal
Located near the front of the
track frame on both sides of the
machine
Indicates the front of the track
frame.
16
Lift Point Decal
Located on both sides of the
boom on the dipper arm
cylinder bracket, and on both
ends of the dozer blade.
Apply lift hooks only in these
locations.
19
Tie-Down Point Decal
Located on both ends of the
dozer blade and near the rear
end of the track frame on both
sides of the machine.
Only use tie-down points to
secure the machine during
transport.
18
Diesel Fuel Decal
USE DIESEL FUEL ONLY!
Located next to the fuel filler
neck.
17
Hydraulic Fluid Decal
Located next to the hydraulic
system filler cap.
USE HYDRAULIC FLUID ONLY!
20
Operator Controls Decal
Located on the ceiling inside the cab.
Provides quick-reference for the SAE operator’s
control option inside the cab.
Read the operator’s manual before operating the
machine. Refer to the operator’s manual for
details about the operator’s controls.