918496/GP0313 109
Engine Maintenance
Allow engine and hydraulic system compo-
nents to cool before maintenance.
Engine Oil
Checking Engine Oil Level
1. Position the machine on a level surface.
2. Perform the “Mandatory Safety Shutdown Procedure” on page 10.
3. Wait until the machine has cooled. See “Service Safety Practices” on page 16.
4. Open engine cover.
5. Remove the dipstick (Y, Fig. 73). Wipe
dipstick with a clean cloth.
6. Insert the dipstick until it is fully
seated, and remove.
7. Read markings on the dipstick, mark-
ings represent FULL and LOW (add
oil) levels.
See “Maintenance Schedule” on
page 104 for the service interval for
replacing the engine oil and filter.
Figure 73 – Engine Oil Dipstick
Y
https://tractormanualz.com/
To Next Page
Loading...
