918496/GP0313 111
11. Remove the oil fill cap (Z, Fig. 77)
and add the recommended oil. See
“Fluid Capacities/Lubricants” on
page 31. Replace cap (Z).
12. Start the engine and let it run for sev-
eral minutes at low idle. Stop the
engine. Wait until the machine has
cooled. See “Service Safety Practices”
on page 16.
13. Check for leaks at the oil filter and
drain plug. Check the oil level. If nec-
essary, add oil until the oil level is at
the full mark on the dipstick.
Figure 77 – Engine Oil Dipstick
Z
https://tractormanualz.com/
To Next Page
Loading...
