Gehl R135 - Leakage Check; Lubrication and Filter Changes; Functional Check

124 50940193/DP0415
Table 14: Leakage Check
Service Procedure
Maximum Interval
10 Hours
(or Daily)
250 Hours
500 Hours
(or Annually)
Check engine for oil/coolant leaks. X
Check cooling system for leaks. X
Check hydraulic system for leaks. X
Table 15: Lubrication and Filter Changes
Service Procedure
Maximum Interval
10 Hours
(or Daily)
50 Hours (or
every week)
250 Hours
(or every 6
months)
500 Hours
(or Annually)
Lubricate grease fittings according to
lubrication diagram (page 128).
X
Change hydraulic oil filter (page 145).
X
a
a. After first 50 hours of operation; every 250 hours thereafter.
X
Change engine oil and filter
(page 133).
X
b
b. After first 50 hours of operation; every 250 hours thereafter.
X
Change cab air filter, if applicable
(page 144).
X
c
c. Replace if needed.
X
Lubricate all levers, cables and hinges. X
Change outer air cleaner filter element.
Check and change inner air cleaner
element if necessary (page 139).
X
c
Change chaincase oil (page 147). X
Change hydraulic oil(page 145). X
Change coolant (page 141). X
Table 16: Functional Check
Service Procedure
Maximum Interval
10 Hours
(or Daily)
250 Hours
500 Hours
(or Annually)
Check seat belt (page 129). X
Check service and parking brake function. X
Check joystick operation. X
Check windshield wipers, if applicable. X
Check control switches/buttons, indicators and
audible warning devices.
X
Check lighting systems. X