128 50940193/DP0415
General Lubrication
Important: Use of lubricants not corresponding to manufacturer recommendations may
invalidate warranty claims. Always dispose of waste lubrication oils and hydraulic fluids
according to environmental laws or take to a recycling center for proper disposal. DO
NOT pour fluids onto the ground or down a drain.
See “Fluid Capacities/Lubricants” on page 183 for proper grease specifications. Wipe dirt
from the fittings before and after applying grease to prevent contamination. Replace any
missing or damaged fittings. Avoid excessive greasing to minimize dirt build-up.
A. Front lift cylinder grease fittings (2).
B. Top lift arm grease fittings (2).
C. Back lift cylinder grease fittings (2).
D. Attachment hitch pivot points (2) – NOTE: Lubricate (D) from inside of pin.
E. Bottom tilt cylinder grease fittings (2).
Lubricate Daily or After Every 10 Hours of Operation
C
B
E
D
A
To Next Page
Loading...
