Gehl R135 - Units Screen; Language Screen; DM1 Screen; DM2 Screen

58 50940193/DP0415
Units Screen
Press the top/bottom of navigation rocker button (M,
Figure 20) to switch between SAE or metric units for
values displayed in screens.
Language Screen
The press the top/bottom of navigation rocker button
(M, Figure 20) to switch between English or Spanish
language for values displayed in screens.
DM1 Screen
Displays engine, drive system, control, and safety
system error code message information. Number of
available messages is displayed at the top left of the
screen (T). Use buttons (P and Q, Figure 20) to scroll
through the messages. See “Engine Diagnostic
Trouble Codes (DTC)” on page 171 for specific error
code details.
DM2 Screen
Continuation of error code message display along with
DM1 Screen. Number of available messages is
displayed at the top left of the screen (T). Use buttons
(P and Q, Figure 20) to scroll through the messages.
See “Engine Diagnostic Trouble Codes (DTC)” on
page 171 for specific error code details.
Table 7: Status, Maintenance and Error Code Screens
Display Mode Description
UNITS
SAE
LANGUAGE
ENGLISH
DM1
SPN: 0
0 of 0
FMI: 0
OCI: 0
T
DM2
SPN: 0
0 of 0
FMI: 0
OCI: 0
T