78 50940193/DP0415
Power-A-Tach® System
Buttons (G and H, Figure 45) on the control
keypad are used to operate the Power-A-
Tach
®
System hitch. Refer to “Connecting
Attachments” on page 96 for more
information.
Note: The Power-A-Tach® system hitch will
not operate if the parking brake is engaged
and/or the operator restraint bar is in the
raised position.
To retract the hitch pins to the
unlocked position:
With the machine running, and the
parking brake disengaged, press and
hold the Power-A-Tach® unlock
button (H, Figure 45) on the control
keypad until flags (P, Figure 46)
move as far as they can to the center
of the hitch.
To extend the hitch pins to the
locked position:
With the machine running, and the
parking brake disengaged, press and
hold the Power-A-Tach® lock button
(G, Figure 45) on the control keypad
until flags (Q, Figure 46) move as far
as they can to the outside of the
hitch.
To prevent unexpected release of the attachment
from the hitch, be sure the latch pins are secure by
verifying that the pin flags (Q, Figure 46) have moved fully to the outside
of the hitch and the locking pins (F, Figure 47) extend down through the
attachment frame.
Figure 45 – Power-A-Tach® Con-
trol Buttons
G
H
Figure 46 – Power-A-Tach® Hitch
Unlocked
Locked
P
Q
To Next Page
Loading...
