RS5/6-34 Telescopic Handler HYDRAULICS
PRINTED IN U.S.A. 601-17 913241/BP0508
Alt= to hide template information
Alt+ to display template information
Template Name: OML_2_col 0-00000
Template Date: 1994_04_22
LIFT CYLINDER TEST
STEP 12
G0805085
Start the engine, set the park brake and raise the
boom approximately 3 feet (1 meter). Shut off the
engine.
NOTE: If the boom lowers while the engine is off
proceed to Step 19.
STEP 13
G0805189
Place a support stand under the attachment end of
the boom.
STEP 14
G0805088
G0805089
Remove the hose (1) from the left port (2) of the lift
cylinder. Install a 3000 psi (207 bar) pressure gauge
and hose (3) between the hose (1) and the port (2).
NOTE: The hose must be long enough to read the
gauge while standing clear of the forklift.
To Next Page
Loading...
