Template Date: 1997_02_12
STEP 4
G0905104
Disconnect the hydraulic fluid supply line from the
hydraulic pump. Install a cap on the fitting and a plug
in the line.
STEP 5
Mark the pump output hydraulic hoses for correct
assembly.
STEP 6
G0905106
Disconnect the remaining hydraulic hoses from the
hydraulic pump. Install plugs in the hoses and caps
on the fittings.
STEP 7
G0905110
G0905111
Remove the two hydraulic pump mounting bolts.
STEP 8
G0905114
Pull the pump forward until the pump input shaft (1) is
clear of the transmission (2). Lift the pump out of the
machine. Remove the gasket from the mounting
flange or transmission.
2
1
To Next Page
Loading...
