Gehl RS5-34 - Page 208

RS5-34 Telescopic Handler CYLINDER REPAIR
PRINTED IN U.S.A. 605-4 913241
Template
Name:
OML
_
2
_
col
Rac
0
-
00000
Template Date: 1997_02_12
Alt
=
to
hide
template
information
Alt+ to display template information
STEP 14
G1544MP
Remove the head gland from the cylinder rod.
STEP 15
G1545MP
Remove and discard the wiper ring from the head
gland.
STEP 16
G1546MP
Remove and discard the inner wear ring from the
head gland.
STEP 17
G1547MP
Remove and discard the inner seal from the head
gland.
STEP 18
G1548MP
Remove and discard the O-rings and backup rings
from the counter balance valve cartridge.
NOTE:
For correct re-assembly record the position
of the O-rings and backup rings before removing .
STEP 19
G1549MP
If required, remove and discard the bushing from the
base end and the rod end of the cylinder.
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com