Gehl RS6-34 - Rear Axle Installation Steps

RS5-34 Telescopic Handler REAR AXLE
PRINTED IN U.S.A. 502-4 913241
Alt
=
to
hide
template
information
Alt+ to display template information
Template
Name:
OML
_
2
_
col
907871E
Template Date: 1997_02_12
STEP 15
G0905136
Remove the bottle jacks. Use the wheels to roll the
axle assembly out from under the chassis.
STEP 16
Use a double-leg chain and hoist to lift the axle only
enough to remove the wheels and tires. Support the
axle on adequate stands. Leave the hoist connected
to ensure that the axle does not fall during wheel
removal procedure.
STEP 17
G0905
Remove the wheel nuts from the wheel bolts.
STEP 18
G0905074
Remove both wheels from the axle.
REAR AXLE INSTALLATION
STEP 19
G0905074
Reinstall each wheel onto the axle.
STEP 20
G0905058
Install the wheel nuts on the wheel bolts and hand
tighten.
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com