Gehl RS6-34 - Frame Leveling Cylinder Installation Steps

PRINTED IN U.S.A. 603-3 913241
Alt
=
to
hide
template
information
Alt+ to display template information
Template
Name:
OML
_
2
_
col
907871E
Template Date: 1997_02_12
RS5-34 Telescopic Handler FRAME LEVELING CYLINDER
STEP 5
G0805210
Disconnect both hydraulic hoses from the frame
leveling cylinder.
NOTE:
One hydraulic hose is behind the cylinder.
STEP 6
Install caps and plugs on all hoses and hydraulic
fittings to prevent contaminating the hydraulic
system.
STEP 7
G0805211
Loosen and remove the retaining bolt (1) and nut (2)
from the upper pivot pin.
STEP 8
G0805212
Remove the upper pivot pin from the frame leveling
cylinder.
STEP 9
Remove the frame leveling cylinder.
FRAME LEVELING CYLINDER
INSTALLATION
STEP 10
G0805212
Install the frame leveling cylinder in the upper pivot
mounts and install the upper pivot pin.
NOTE:
Align the pivot pin holes with the holes in the
cylinder mount.
1
2
RS5-34 Telescopic Handler FRAME LEVELING CYLINDER
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com