Gehl RS6-34 - Page 199

RS5-34 Telescopic Handler TILT CYLINDER
PRINTED IN U.S.A. 604-3 913241
Alt
=
to
hide
template
information
Alt+ to display template information
Template
Name:
OML
_
2
_
col
907871E
Template Date: 1997_02_12
STEP 5
G0805222
Use a hoist and lifting strap, position the lifting strap
around the tilt cylinder and apply upward pressure.
STEP 6
G0805222
Remove the retainer bolt (1) and nut (2) from the
upper pivot pin.
IMPORTANT:
Protect the chrome finish in the
cylinder rod at all times. Damage to surface of the rod
can cause premature seal failure.
STEP 7
G0805219
Remove the upper pivot pin from the tilt cylinder.
STEP 8
G0805220
Using the hoist, lower the tilt cylinder until it clears
the mounting bracket. Remove the tilt cylinder from
the machine.
1
2
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com