Gehl RS6-34 - Page 212

RS5-34 Telescopic Handler CYLINDER REPAIR
PRINTED IN U.S.A. 605-8 913241
Template
Name:
OML
_
2
_
col
Rac
0
-
00000
Template Date: 1997_02_12
Alt
=
to
hide
template
information
Alt+ to display template information
STEP 38
G1533MP
Install a new nylon locking insert inside the set screw
hole. Install the set screw in the gland nut. Torque the
set screw to 5 to 7 ft.-lbs. (7 to 9 Nm).
STEP 39
G1548MP
Lubricate and install new O-rings (1) and backup
rings (2) on the counter-balance valve.
STEP 40
G0805123
Install the load counter-balance valve.
1
1
2
2
2
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com