Gehl RS6-34 - Slave Cylinder Installation Steps

RS5-34 Telescopic Handler SLAVE CYLINDER
PRINTED IN U.S.A. 606-3 913241
Alt
=
to
hide
template
information
Alt+ to display template information
Template
Name:
OML
_
2
_
col
907871E
Template Date: 1997_02_12
STEP 6
G0905008
Loosen and remove the retainer bolt (1) and nut (2)
from the upper pivot pin.
STEP 7
G0905009
Remove the upper pivot pin.
STEP 8
Remove the slave cylinder from the machine.
SLAVE CYLINDER INSTALLATION
STEP 9
G0905010
G0905011
Using a hoist and lifting strap, install the slave
cylinder in the upper pivot mounts, and install the
upper pivot pin.
NOTE:
Align the pivot pin holes with the holes in the
cylinder mount.
2
1
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com