Template Date: 1994_04_22
STEP 27
G1648MP
Place the roller bearing assemblies between the
sections of the mount, then insert the pin. Be sure
the retainer bolt holes are lined up.
STEP 28
G1649MP
Install the retainer bolt and nut through the pin and
tighten.
STEP 29
G1655MP
Pull the double chain assembly up and over the
sheaves and place each clevis through the mounting
holes in the outer boom securing it with one nut.
STEP 30
Torque the double chains. See Section 702 of this
manual for correct procedure.
STEP 31
G1657MP
Install the lock nut on each clevis.
To Next Page
Loading...
