Gehl RS6-34 - Steering Control Valve Installation Steps

RS5-34 Telescopic Handler STEERING CONTROL VALVE
PRINTED IN U.S.A. 401-3 913241
Alt
=
to
hide
template
information
Alt+ to display template information
Template
Name:
OML
_
2
_
col
907871E
Template Date: 1997_02_12
STEP 9
G0905037
Mark the hydraulic hoses and fittings for correct
installation. Remove the hydraulic hoses from the
steering control valve.
NOTE:
Place a drip pan under the steering control
valve before removing hoses.
STEP 10
Install caps and plugs on all hoses and hydraulic
fittings to prevent contaminating the hydraulic
system.
STEP 11
G0905038
Support the steering control valve and remove the
four mounting bolts. Remove the steering control
valve from the machine.
STEERING CONTROL VALVE
INSTALLATION
STEP 12
G0505026
Position the steering control valve in place. Make
sure the fittings are in the proper position for hose
installation.
STEP 13
G0905039
Install the four mounting bolts.
STEP 14
Remove the caps and plugs from the hydraulic hoses
and fittings.
View thousands of Crane Specifications on FreeCraneSpecs.com
View thousands of Crane Specifications on FreeCraneSpecs.com