19. Basic Servicing Practices
3-8
19-1-4. Grease
• Grease ensures smooth operation of moving parts such as connectors and prevents operating noises.
• The nipples not listed on the pages for periodic service are those used for overhaul purposes. Normally
it is not necessary to refill them.
Grease them if any abnormal condition arises after long term use.
• Wipe away all excess grease after greasing.
Carefully wipe the excess grease from all moving parts which might be easily worn by adhered sand
or grit.
19-1-5. Storing the oil and fuel
• Store the oil and fuel indoors so that they will not be contaminated by impurities such as water or dust.
• When you store oil or fuel in drums for a long period, position them so that their outlets align in a
straight line (to prevent moisture absorption).
When storing the oil or the fuel outdoors, cover the drums with a waterproof sheet.
• To avoid deterioration caused by long-term storage, use the oil on a first-in first-out basis.
19-1-6. Filter
• The filters are very important parts which prevent impurities from getting into critical devices through
the lube oil, fuel and air systems.
Replace the filter elements periodically according to the instructions of the Operation & Maintenance
Manual.
Under difficult conditions, you need to replace the filter elements earlier than suggested in the Opera-
tion & Maintenance Manual depending on the type of oil and fuel (sulfur content).
• Never reuse the filter elements (cartridge type) by cleaning them.
•
When replacing a filter element, confirm that no metallic dust or foreign solids are present on the old filter.
If they are found to be present, contact the nearest dealer.
• Do not unpack the filter element before use.
• Use genuine original equipment replacement filter elements.
Courtesy of Machine.Market
To Next Page
Loading...
