1-2
These instructions should be strictly followed
for the safety of you, others and your machine.
WARNING
7. Basic Precautions
• The operation and servicing of this machine is restricted to qualified persons.
• When operating or servicing the machine, follow all the safety rules, precautions and procedures.
• Any work performed by a team or with a signal person should be conducted in accordance with
signals agreed on beforehand.
• Make sure that all guards and covers are installed in their correct position. If any of them are dam-
aged, repair them immediately.
• The proper use of all safety devices, such as lock levers, should be well understood by the ma-
chine operator.
• Never remove the safety devices. Always make sure that they operate properly.
For lock levers, refer to Section "12-3. Control levers and pedals".
• Incorrect operation of the safety devices could cause serious bodily injury.
• Do not wear loose clothing or jewelry that can be caught on the
control levers and other machine parts. Also avoid wearing
working clothes stained with oil as they can ignite.
• Be sure to wear a helmet, safety goggles, safety shoes, a
mask, gloves and other protective items, as appropriate.
Take particular precautions when generating metal debris,
when striking metal objects with a hammer or when cleaning
components with compressed air.
Also make sure there are no persons near the machine.
For cleaning the fuel, oil and air filter elements, refer to Section "25-2. Non-periodic services"
.
• Never operate the machine after consuming alcoholic beverages, or while you are under the influ-
ence of alcohol or if you feel ill or unwell, as that could result in accidental bodily injury to yourself
or others.
Follow safety rules at your workplace
Install safety devices
Wear proper clothing and safety items
Alcohol
Courtesy of Machine.Market
To Next Page
Loading...
