25. Procedures for Maintenance
3-42
25-3-8. Checking the electrical equipment
Check fuses for damage, wiring for poor connections or
short circuits, and battery terminals for corrosion or loose
fits. Take corrective action.
Check the following items after the starter switch is turned
to the "ON" position.
1) Check the monitor functions
• Check the fuel meter, water temperature gauge, and
hourmeter.
• Check the engine oil pressure alarm lamp, battery
charge alarm lamp and water temperature alarm lamp.
2) Check that the switch functions correctly and the lamp
lights correctly.
• Check the boom lights
3) Check the travel alarm function.
• To check the travel alarm function, push or pull the travel
levers after the lock levers have been unlocked.
If a fuse blows out frequently, contact your dealer
for assistance.
Courtesy of Machine.Market
To Next Page
Loading...
