12. Description of Control Devices
2-10
(2) Control lever (L)
(3) Control lever (R)
Use these levers to control the implements and swinging
of upper structure.
Refer to Section "13-8. Operating the implement".
(4) 2 way valve
STD : ISO pattern
OPT : OPT pattern
Refer to Section "13-8. Operating the implement".
When pushing the lock levers forward, be careful
not to accidentally touch the implement control le-
vers.
The relationship between the control lever shift
configuration and the implement movement is de-
tailed in this manual. To prevent an accident due to
operational error, therefore, the hydraulic system
must never be modified by reconnecting the hy-
draulic hoses and valves.
Unlock
(Left side)
Lock lever
020320-00E
020321-00E
(Front)
(Left side)
N
020322-00E
(Front)
(Right side)
N
2 way valve Lock plate
Lock
OPT
pattern
STD
pattern
Pattern
change lever
Unlock
000339-00E
Courtesy of Machine.Market
To Next Page
Loading...
