Gehl Z17 GEN:2 - 13-2-2. Starting the engine in cold weather

13. Operating Instructions
2-29
13-2-2. Starting the engine in cold weather
To start the engine when the outside air temperature is low,
follow the steps below:
1) Pull the accelerator lever (1) back to the "RUN" position.
2) Turn the starter switch key in the starter switch (2) to the
"HEAT" position and keep it there for approximately 10
to 15 seconds to preheat the intake air of the engine.
3) Turn the starter switch key in the starter switch (2) to the
"START" position to start the engine.
4) After the engine has started, let go of the starter switch
(2) key.
The starter switch key will return to the "ON" position by
itself.
• First check that there are no people or obstacles
around the machine.
Then sound the horn and start the engine.
• Be sure that you are seated on the operator's
seat when starting the engine.
• When starting the engine in an enclosed place,
be sure that there is adequate ventilation so that
the exhaust gases can escape.
020324-00X
(1)
(2)
020325-00E
Idling
Run
(1)
START
ON
OFF
022491-00
X
HEAT
START
ON
OFF
022492-00
X
HEAT
START
ON
OFF
022490-00
X
HEAT
Courtesy of Machine.Market