13. Operating Instructions
2-65
• Park on solid, level ground.
• Do not park on a slope. If parking on a slope is unavoidable,
block the tracks with solid pieces of wood, place the blade
on the ground, and dig the bucket into the ground.
1) Set the left and right travel levers (1) or pedals (3) to the
neutral position to stop the machine.
2) Idle the engine with the accelerator lever (2).
13-15. Parking the machine
Do not stop the machine suddenly, but try to stop
with a safety margin.
• Do not touch the control levers and pedals acci-
dentally. Otherwise, the implement or the ma-
chine may move unexpectedly, causing a serious
accident.
• When leaving the operator's seat, be sure to
place the lock levers securely in the lock position
and remove the starter switch key.
120 degrees
Place the
blade on
the ground
Block
Dig the bucket into the ground
000295-00E
015572-00X
(1)
(3)
(2)
(Left)
(Right)
Neutral
(1)
000449-00E
Idling
(2)
009141-00E
To Next Page
Loading...
