Gehl Z27 - Inspection Requirements after Completing Operation

13. Operating Instructions
2-66
3) Place the bucket on the ground with its bottom surface
in contact with the ground.
4) Place the blade on the ground.
5) Set the lock levers to the "LOCK" position.
Check the water temp. meter (1) and the engine oil pres-
sure alarm lamp (2), and also check the residual quantity
of fuel with the fuel level gauge (3).
13-16. Inspection requirements after completing operation
000451-00X
Lock
(Left side)
(1)
009042-00E
022514-00X
(
'
*
%
(7'.
10
1((
96'/2
*174/'6'4
J
(1)
(3)
(2)