13. Operating Instructions
2-67
IMPORTANT
• Stopping the engine after rotation at high speed may
shorten the engine life. Do not stop the engine sud-
denly except in case of emergency.
• If the engine is overheated, do not stop the engine
immediately. Gradually lower the engine tempera-
ture by rotating the engine at medium rotational
speed before stopping the engine.
1) Idle the engine for approximately five minutes with no
load.
(The engine temperature gradually lowers.)
2) To stop the engine, turn the starter switch key (1) to the
"OFF" position.
3) Take the key out of the starter switch (1).
Note :
As long as the starter switch key is in "ON" position and the
lock lever(s) is(are) in unlock position, each implement can
be moved by its own weight when respective control levers
are operated soon after the engine is stopped.
13-17. Stopping the engine
015573-00X
(1)
022494-00X
To Next Page
Loading...
