3-14
21. Fueling, Oiling and Greasing Based on Temperature Range
Select fuel and oil based on to the air temperature range.
The prescribed amount of oil means the total amount of oil included in the piping and equipment. The
amount of oil to be changed means the amount of oil replaced in checking and servicing.
If you start the engine at air temperatures lower than 32°F (0°C), use SAE10W, SAE10W-30, or
SAE15W-40 even if the temperature in the daytime rises to 50°F (10°C) or so.
Because a long-life coolant (LLC) is added to the cooling water, you need not change it unless the tem-
perature falls bellow -31°F (-35°C).
If the temperature falls below -31°F (-35°C), refer to Section "25-2. Nonperiodic services" to control the
density of the cooling water.
21-1. Fuel and oil
21-2. Cooling water
Part be refilled Oil type
Recommendations with regard to temperature ranges
Prescribed
amount of oil
Amount of oil
to be changed
Z27 Z35 Z27 Z35
Engine oil pan Engine oil
3.0 Qts.
(2.8 L)
5.8 Qts.
(5.5 L)
7.7 Qts.
(7.3 L)
4.2 Qts.
(4.0 L)
5.8 Qts.
(5.5 L)
7.7 Qts.
(7.3 L)
SAE 10W CF
SAE 10W-30 CF
SAE 15W-40 CF
SAE 90 (GL-4)
ISO VG46
No.2-D
No.3-D (S)
No.3-D
Travel reduction gear
Gear oil
0.53 Qts. (0.5 L)
(For right and left each)
0.53 Qts. (0.5 L)
(For right and left each)
Hydraulic oil system
Hydraulic oil
In the tank 9.5 Gals. (36 L)
Other parts
4.8 Gals. (18 L)
9.5 Gals. (36 L)
Fuel tank Light oil 11.1 Gals. (42 L)
Cooling system Water Long-life coolant (LLC) added
Radiator
0.42 Qts. (0.4 L)
Subtank
-4
(-20)
(°F)
(°C)
14
(-10)
32
(0)
50
(10)
68
(20)
86
(30)
To Next Page
Loading...
