25. Procedures for Maintenance
3-36
Table of mixing ratio of anti-freeze to water
Note :
At the delivery from the factory, water and anti-freeze are
mixed in the ratio shown above for the -31°F (-35°C) tem-
perature.
Use soft water or distilled water. If you obtain water from a
river, a well or a small water-supply system, consult your
dealer.
Use a densitometer to control the mixing ratio.
Lowest temperature
°F
(°C)
23
(-5)
14
(-10)
5
(-15)
-4
(-20)
-13
(-25)
-22
(-30)
-31
(-35)
-40
(-40)
Model
Z27
Amount of anti-freeze
Qts.
(L)
0.53
(0.5)
0.85
(0.8)
1.06
(1.0)
1.16
(1.1)
1.37
(1.3)
1.59
(1.5)
1.70
(1.6)
1.90
(1.8)
Amount of water
Qts.
(L)
2.89
(2.7)
2.57
(2.4)
2.36
(2.2)
2.26
(2.1)
2.05
(1.9)
1.83
(1.7)
1.72
(1.6)
1.52
(1.4)
Model
Z35
Amount of anti-freeze
Qts.
(L)
0.74
(0.7)
1.16
(1.1)
1.37
(1.3)
1.70
(1.6)
1.90
(1.8)
2.11
(2.0)
2.33
(2.2)
2.54
(2.4)
Amount of water
Qts.
(L)
3.88
(3.7)
3.46
(3.3)
3.25
(3.0)
2.92
(2.8)
2.72
(2.6)
2.51
(2.4)
2.29
(2.2)
2.08
(2.0)
Keep sources of ignition away from the antifreeze
because it is flammable.
When removing the drain plug, be careful that the
anti-freeze does not contact your eyes or skin.
To Next Page
Loading...
