EasyManua.ls Logo

Gehl Z35 - 9. Precautions for Servicing; Pre-Service Checks and Tool Usage

Gehl Z35
232 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-17
Neglecting these instructions
may cause extreme hazards.
WARNING
9. Precautions for Servicing
If another person should start the engine or operate the control levers while service is in progress,
the service personnel can sustain serious bodily injury.
Attach the "SERVICING IN PROGRESS" tag indicating "Servicing in Progress" to one of the im-
plement control levers.
The "SERVICING IN PROGRESS" tag is enclosed with the Operation Manual.
Using damaged or worn tools or using tools inappropriate for the
required application is very dangerous, and may also cause
damage to the machine. Make sure to use the tools that are ap-
propriate for the specific job.
For information about tools, refer to Section "22-1. Required
tools".
9-1. Precautions before servicing
Attach the "SERVICING IN PROGRESS" tag to an implement control lever
Use appropriate tools
DANGER
172437-03250
SERVICING IN PROGRESS
NEVER OPERATE EXCAVATOR WHEN THIS TAG IS
ATTACHED TO AN IMPLEMENT CONTROL LEVER,
TO PREVENT BODILY INJURY.
(Keep this tag in Operation & Maintenance Manual
storage, when not in use.)
009000-00X
000302-00X

Table of Contents

Related product manuals