12. Description of Control Devices
2-7
(1) Starter switch
Use this switch to start and stop the engine.
• OFF position
Turn the key to "OFF" to stop the engine and disconnect
electrical circuit or remove the key.
• ON position
Turn the key to "ON" to connect the electrical fuel sole-
noid circuit and the electrical charging circuit. (Keep the
key in this position while running the engine.)
• START position
Turn the key to "START" to start the engine. Release the
key after the engine is started and it will return to the
"ON" position.
• HEAT position
Turn the key to activate the preheating circuit and warm
up intake air to start the engine easier in cold weather.
(Set the key to this position when the outside tempera-
ture is low.)
• When the engine is not running and the switch is in the
"ON" position, the buzzer keeps sounding.
Turn the switch to the "OFF" position to stop sounding.
12-2. Switch
015402-00E
(1)
(5)
(4)
(2)
(3)
(7)
(6)
For cabin type
START
HEAT
ON
OFF
022488-00X
To Next Page
Loading...
