12. Description of Control Devices
2-18
Opening and closing the lower windshield
1) Hold the lower windshield with both hands to lift it up.
2) Put the lower windshield in the storage area on the rear
left of the cabin.
3) Lock the lower windshield securely by pressing it
against the window locks (D).
4) Push the upper side of each window lock (D) to remove
the windshield put in storage.
Adjust the seat so that the operator can easily operate the
control levers in good posture.
Seat position control adjustment (forward and backward)
Pull the slide lever (A) under the seat upward to slide the
seat forward or backward.
The adjustable amount of the seat for forward and back-
ward sliding is 2.95 in. (75 mm)
And the seat can be adjusted at any of the five levels within
2.95 in. (75 mm)
Open and close the lower windshield after housing
the upper windshield.
12-8. Operator’s seat
• Be sure to adjust the seat slide to obtain the best
operating position whenever you start operation
or a new operator begins to operate the machine.
• Do not place any objects within the moving area
of the operator’s seat.
• Do not adjust the operator’s seat while operating
the machine.
Lower windshield
009017-00E
Push
Push
Lower windshield
(D)
000358-00E
(A)
Adjustable amount :
2.95 in. (75 mm)
(A)
009224-00E
To Next Page
Loading...
