Need help?Do you have a question about the Geko G81058 and is the answer not in the manual?
Critical safety precautions to prevent injury or death from tool misuse.
Guidance on attaching the cutting blade or string head to the drive shaft.
Instructions for securely attaching the engine to the drive shaft.
Pre-operation checks and safety steps before engine ignition.
The correct procedure for safely starting the brush cutter's engine.
Best practices and techniques for effective and safe operation.
Advice on managing external disturbances during operation.
Information on vibration-related health risks and preventative measures.
Explanation of the various safety symbols found on the brush cutter.
Recommended tasks to keep the machine in optimal working condition.
Guidelines for safely managing fuel, including mixing and storage.
Instructions for safely moving the brush cutter from one location to another.
Step-by-step guide for correctly mixing gasoline and oil.
Safe practices for filling the fuel tank to the recommended level.
Recommendations to prevent engine damage and ensure longevity.
Detailed steps for initiating the engine, including choke and fuel pump use.
The correct method for safely shutting down the brush cutter.
How to fine-tune the engine's idle speed for stable operation.
Recommendations for choosing accessories based on cutting material.
Proper installation and safe operation when using metal cutting blades.
Techniques for efficient cutting of grass and weeds.
Understanding and mitigating the risks associated with blade bounce.
Tips and practices to minimize the occurrence of blade bounce.
Techniques for ensuring stable and safe handling during cutting.
Specific instructions for performing cutting tasks using the string head.
Common causes and remedies for an engine that fails to ignite.
Troubleshooting steps for issues causing reduced power or sudden stops.
Diagnosing and resolving issues where the engine starts then shuts down.
Identifying reasons for ineffective cutting and solutions.
Procedures for safe transport and responsible disposal of the product.
Maintenance checks required after 20 hours of operation.
Maintenance tasks required after 50 hours of operation.
Understanding and managing unavoidable risks associated with the product.
General| Brand | Geko |
|---|---|
| Model | G81058 |
| Category | Brush Cutter |
| Language | English |
To Next Page