Built In Photocell to
deactivate IR during
daylight and save energy
WDR great for retail use where the
camera is looking into a brightly lit
display or window/door opening
360° Rotation Left To
Right & 90° Rotation Up
& Down to allow both
ceiling and wall mounting
Up The Co-Ax Control
of OSD menu using a
REM088 in-line controller
Tough Anti-Vandal
Metal Case
2.8-12mm 2 Mega
Pixel varifocal lens
Choice Of 3 Colours
to suit indoor or
outdoor application
Smooth Eyeball
Design for easy
adjustment during
installation
IR LED Array to add
extra illumination
at night
Separate Glass to
prevent IR reflection
into the camera lens
Optional Deeper Base
to give extra room for
wiring if required
Simple ZOOM Adjust
to get the right shot
even from up a ladder
Simple FOCUS Adjust
for fine tuning of
camera’s image
Menu IteM Sub Menu Sub Menu OptIOnS
SCENE SELECT
(FULL AUTO
/ INDOOR /
OUTDOOR /
ITS / CUSTOM)
SHUTTER AGC AUTO / MANUAL / FIX
AUTO: 1. AE LEVEL: 01~250
3. SENS UP: OFF / AUTO
MANUAL: 1.
ATW / PUSH / USER1 / USER2 / MANUAL / PUSH LOCK (DEPENDANT ON SCENE)
ATW: 1. SPEED: 000~255
2. DELAY CNT: 001~255
3. ATW FRAME: 001~255
4.
ENVIRONMENT: AUTO / INDOOR /
SUNNY / SHADE
2. R-GAIN: 0~255
2. R-GAIN: 0~255
MANUAL: 1. LEVEL: 00~63
HLC: 1. CLIP LEVEL: 000~255
ATR-EX ON: 1. CONTRAST: LOW / MID / HIGH 2. CLEAR FACE: OFF / LOW / MID / HIGH
DNR 1. LEVEL: 0~6
DAY/NIGHT AUTO / DAY / NIGHT
2. CNTL SIGNAL: INT / EXT1 / EXT2
3. DELAY INT: 000~255
4. DAYNIGHT: 000~255
5. NIGHTDAY: 024~255
CAM086U - Key Features & OSD Menu
OSD Menu System
To Next Page
Loading...