the midi set up
Page15
manual addendum Genesys s
SELECTING MANUAL/BASS
Basically the MANUAL/BASS setting allows to perform in the same way as described above, but using the
styles arrangements. The chord lines played with the left hand lead the Genesys s chord recognizing system
of the styles section, while the bass parts are played in realtime using the fi rst two line of buttons.
LEAD
Play the selected
PRESET
BASS
Play the BASS
sound recalled
by the selected
PRESET
CHORD
The Playied chord
lead the arrage-
ment section of the
currently selected
style
ACCORDION 2
The ACCORDION set up 2 works without the activation of the MIDI common channel. In this case all the realtime
MIDI channels of the Genesys s are rearranged in order to lead the three accordion sections. Select the setup
you prefer according the the specifi cations of your MIDI accordion.
Select the ACCORDION SET UP #2 by rotating the
DIAL.
ACCORDION SET UP #2 MIDI Channel set up
MIDI ACCORDION STANDARD SET UP
Normally the most diffused MIDI accordion are set with the following default MIDI set up:
The right side
keyboard
Transmit on
MIDI ch. 1
The BASS lines of the left
keyboard Transmit on
MIDI ch. 2
The CHORD lines of the
left keyboard Transmit on
MIDI ch. 3
To Next Page
Loading...
