Minimal:48mm
L-Bracket
Z-Bracket
In-swing
Frame
Door
Armature
LZ-300 Bracket
In-swing doors
GIANNI INDUSTRIES, INC.
Copyright © Gianni Industries, Inc. All rights reserved.
DM-CA-LZ-300 Ver. E Published on 2011.0 9.08
26
250
4
2
25
0
48
5
3
0
Unit:mm
With LZ bracket for in-swing doors
2
Use the fixing bolt to tighten
the electromagnet lock on the
L bracket
1
Find a mounting location on the
door frame for the L bracket. Make
sure that the door is still closeable.
6
Close the door and connect the
power.
7
Test the tightness and adjust
the Z bracket to fit the door.
Finish
Lock tighten the Z bracket
4
Insert the guide pins into the
armature plate.
5
Assemble the armature plate and
the Z bracket. (Must add rubber
washer)
3
Assemble the Z bracket, and make
sure that the Z bracket is adjustable.
Power
2
50
250
55
6
0
50
1
5
5
6
3
Application of the Electromagnet:
10001 ,10005(double), EM-300 Series
No. 13, Zhongxing Rd., Tucheng Dist., New Taipei
City 236,Taiwan (R.O.C.)
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: inquiry@gianni.com.tw
Website: gianni.tw
General